Home/Products/WATSG Automatic Transfer Switch
WATSG automatic transfer switches and H-type controller
Automatic transfer switch · 32-800 A · PC class

WATSG Automatic Transfer Switch

32-800 A · AC 230/400 V · Ui 1000 V · Modbus

Schneider WATSG automatic transfer switching equipment, 32-800 A, PC class, with patent cylindrical moving contacts, 100 ms short-time withstand, double-break isolation and padlock, full-series Modbus communication, and A/H type controllers for flexible control and monitoring.

32-800 A
Rated current
1000 V
Insulation voltage
PC
Equipment class
<1 s
Transfer time

Technical parameters

Data from Schneider WATSG catalog 2024. Values are listed by frame size 100/160/250/800. Confirm the exact configuration before ordering.

Frame sizes100 / 160 / 250 / 800 A
Rated operational current Ie (AC-33B)32/63 · 100 · 125/160/200 · 250/320/400/500 A
Rated operational current Ie (AC-33iB)32/63/100 · 125/160 · 250 · 320/400/500/630/800 A
Poles2 / 3 / 4 (800 frame: 3 / 4)
Rated insulation voltage Ui1000 V
Rated impulse withstand voltage Uimp8000 V
Rated operational voltage UeAC 50/60 Hz, 230/400 V (800 frame: 400 V)
Rated short-circuit making capacity Icm7.65 / 17 / 17 / 34 kA
Rated short-time withstand current Icw (100 ms)5 / 10 / 10 / 17 kA
Rated limited short-circuit current Iq (fuse protected)80 kA (2P) / 100 kA (3P, 4P); 800 frame: 100 kA
Mechanical life10,000 operations
Electrical life6,000 operations
Minimum contact transfer time< 1 s (100/160) · < 1.5 s (250/800)
Utilisation categoryAC-33B / AC-33iB
Equipment classPC class

Standards and compliance

General rulesGB 14048.1 / IEC 60947-1
Transfer switching equipmentGB/T 14048.11 / IEC 60947-6-1
CertificationCCC, RoHS 2.0
Pollution degreeIII
EMC immunityESD / RF radiated / EFT / surge / RF conducted: Level 3; radiation class B

Operating conditions

Ambient temperature-25 ~ +70 °C
Storage temperature-35 ~ +85 °C
Altitude≤ 2000 m
Relative humidity≤ 95% at +55 °C

Key features

Patent cylindrical moving contacts

Reduces friction during contact, accelerates opening/closing and makes transfer smoother and faster.

100 ms short-time withstand

Better than the national standard requirement, improving coordination with line protection.

Modbus communication

Full series supports Modbus, enabling remote signalling, telemetry and remote adjustment; can connect to local and cloud device management systems.

Three control types

Automatic, manual and remote control types to meet different control needs; position feedback is standard.

Double-break isolation and padlock

Standard double-break padlock function for safer operation and maintenance; padlock possible only in OFF position.

A-type / H-type controllers

A-type controller supports multiple plug-in expansion modules; H-type has LCD display and manual/auto keys. T-Helper maintenance assistant available.

Optional over/undervoltage protection

Adjustable thresholds: undervoltage 160-190 V (2P/4P) or 280-360 V (3P); overvoltage 240-280 V (2P/4P) or 420-480 V (3P).

Adjustable transfer / return delay

DIP switches set transfer and return delay: 0 / 5 / 15 / 30 s; working modes include auto-auto recovery, mutual standby and auto-non-recovery.

Indicator status

IndicatorFunctionStatus indication
UI lampPower I statusSteady: normal · Flashing: fault
UII lampPower II statusSteady: normal · Flashing: fault
Ion lampPower I closedSteady: closed · Off: open
IIon lampPower II closedSteady: closed · Off: open
RUN lampOperating statusSteady: auto · Off: manual · Flashing: fault alarm

Optional accessories

Connection cableH-type controller standard 2.0 m secondary cable; 3.0 / 4.0 / 5.0 m available on request.
Operating handleOne manual operating handle supplied as standard.
Phase barriersProtects incoming and outgoing sides against phase-to-phase short circuits; one set = 3 pieces, optional.

Need a WATSG quote or selection support?

Send us the frame size, current rating, poles and controller type. We will confirm the exact configuration and offer.

Request a quote